Tools » Hydraulics

Cast Iron Rotary Pump Easy to operate, just turn crank handle. To use as a siphon, prime pump by turning crank handle several times: liquid automatically siphons to lower level. Used for light oil and petroleum products. Dispenses 8 oz. per revolution. Fits 15, 30 and 55 gallon drums. Cast iron ...

Gear-type, heavy duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum ...

- 18 sizes - Cadmium plated leaves - Standard thread pitch gauge measures the number of threads per inch

The Hypro D50 pump is a durable 2-diaphragm pump capable of spraying fluids such as pesticides and herbicides. Remember to use a regulator with your pump: We recommend the 9910-GS40GI. Diaphragm and valve repair kits are also available for the D50.

-Powered by a strong 12-ton hydraulic bottle jack. -Remove and install bearings, gears, U-joints, bushings, ball joints, pulleys, etc. Open side heavy duty construction allow work on the longest work pieces. Raise and lower table for the best working distance possible. Spring return ram speed up ...

Bending-die sizes: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2" and ". Overall dimensions: 25"W, 23"H, 9"D; total weight 175 lbs, ships UPS/Fed Ex in 2 parcels. One-year warranty and Jack's Tool Shed worry-free Satisfaction Guarantee.

Rotary Drum Pump - Ryton Ryton construction with ryton vanes, viton oil seal and teflon flange gaskets. Used for aggressive chemicals such as chlorinated solvents and hydrocarbons. Not recommended for ketones and ethers and very strong oxidizing agents in concentrated form. Dispenses 8 oz. per ...

The Hypro diaphragm repair kit 9910-Kit2423 is used to replace worn or damaged diaphragms on the Hypro D403 diaphragm pump. When the fluid in the oil sight glass turns a milky gray color it means that one (or more) of the diaphragms has ruptured and the fluid to be pumped is mixing with the oil in ...

Operates at 70-170 PSI to develop up to 10,000 PSI, maximum output 20,000 lbs. Average air consumption 10 CFM; air inlet 1/4" NPT, includes 6' hydraulic hose with fitting; 21 lbs. Stroke length 1", oil flow at 100 PSI 30 cu in/min; usable oil capacity 42 cu in (690cc). One-year warranty and ...